Inaugural drill program intersects antimony enrichment across multiple drill holes, including 5.50 metres averaging 0.08% Sb including 0.83 metres grading 0.49% Sb, alongside gold, silver, and base-metal enrichment
VANCOUVER, British Columbia, Nov. 18, 2026 (GLOBE NEWSWIRE) -- Maxus Mining Inc. (“Maxus” or the “Company”) (CSE: MAXM | OTCQB: MXMGF | FRA: R7V) is pleased to announce initial assay results from its 2026 inaugural diamond drilling program (the “Program”) at the Alturas West Project (the “Project” or “Alturas West”) in British Columbia (Please see Figure 1).
Initial results from eight (8) diamond drill holes (ALTW-26-001 through ALTW-26-008) have identified wide intervals of elevated antimony (Sb), together with associated gold (Au), silver (Ag), lead (Pb), zinc (Zn), and copper (Cu) enrichment. Importantly, the maiden drilling program represents the first subsurface test of the Project's antimony potential, following the identification of exceptionally high-grade antimony mineralization at surface, including previously reported samples exceeding 69% Sb. The initial drill results establish the presence of antimony enrichment below high-grade surface showings and provide new geological and geochemical information to guide future exploration targeting.
Together, these results provide additional geochemical information regarding the distribution of antimony and associated elements in the Alturas West mineralized system. The Company considers these results encouraging and will continue integrating the analytical data with geological observations to refine its understanding of the mineralized system and prioritize future exploration targets.
Drill hole locations and selected antimony, gold, and copper assay results are illustrated in Figures 1 through 4.
Initial Exploration Highlights
- First-Ever Drilling Confirms Subsurface Antimony Enrichment: The inaugural eight (8) hole drill program identified elevated antimony concentrations in multiple drill holes, providing initial confirmation of subsurface antimony mineralization at Alturas West.
- Antimony Intersected Over 5.50 Metres: Hole ALTW-26-006 returned 5.50 metres averaging 777 ppm Sb (0.078% Sb), including a higher-grade interval of 0.83 metres grading 4,860 ppm Sb (0.486% Sb).
- Antimony-Gold-Silver Association Identified: Hole ALTW-26-007 intersected 9.00 metres averaging 0.165 g/t Au and 131 ppm Sb, including 4.00 metres averaging 0.237 g/t Au, 187 ppm Sb and 3.30 g/t Ag, with localized lead, zinc, and arsenic enrichment.
- Multiple Drill Holes Exhibit Antimony Enrichment: Elevated antimony concentrations were identified in seven (7) of the eight (8) reported drill holes, providing additional geochemical data to evaluate the distribution of antimony within the initial drilling area.
- High-Grade Surface Mineralization Provides Exploration Context: Previously reported surface samples exceeding 69% Sb demonstrate the presence of exceptionally high-grade antimony mineralization within the Project area. The relationship between this surface mineralization and the subsurface drill intersections remains to be established.
- Multi-Element System Supports Further Exploration: Antimony, gold, silver, arsenic, and base-metal enrichment across the initial drilling area provides a foundation for refining the geological model, evaluating potential mineralization controls and identifying targets for follow-up exploration.
“We are pleased with the initial results from our inaugural drilling program at Alturas West, which successfully intersected antimony mineralization and identified encouraging multi-element associations, including gold, silver, copper, lead, and zinc,” commented Ranbir Kalan, Director of Maxus Mining. “As the first drilling ever completed on the Project, this program marks an important milestone in advancing our understanding of the Project's geology and mineralization. These results provide a valuable foundation for further geological interpretation and exploration targeting as we continue to evaluate the broader potential of Alturas West.”
Table 1. Selected Assay Highlights – Alturas West Project
| Drill Hole | From (m) | To (m) | Length (m) | Sb (ppm) | Au (g/t) | Ag (g/t) | Cu (ppm) |
| ALTW-26-001 | 9 | 13.5 | 4.5 | 132.7 | 0.013 | 1.96 | 329 |
| ALTW-26-001 | 94 | 105.3 | 11.3 | 7.6 | 0.003 | 0.25 | 708 |
| Including | 101.5 | 105.3 | 3.8 | 8.1 | 0.004 | 0.25 | 1,048 |
| ALTW-26-002 | 8.1 | 12 | 3.9 | 73.4 | 0.023 | 0.31 | 53 |
| ALTW-26-003 | 13 | 17 | 4 | 77.5 | 0.021 | 0.42 | 62 |
| ALTW-26-004 | 10 | 17.9 | 7.9 | 82.2 | 0.014 | 0.31 | 85 |
| Including | 10 | 15 | 5 | 101.4 | 0.016 | 0.34 | 68 |
| ALTW-26-006 | 23 | 29 | 6 | 36.5 | 0.051 | 1.15 | 77 |
| ALTW-26-006 | 44 | 49.5 | 5.5 | 777.5 | 0.045 | 0.49 | 49 |
| Including | 46.05 | 46.88 | 0.83 | 4860 | 0.173 | 1 | 91 |
| ALTW-26-007 | 112 | 121 | 9 | 131.2 | 0.165 | 1.66 | 37 |
| Including | 113 | 118 | 5 | 208.4 | 0.186 | 2.38 | 44 |
| Including | 116 | 120 | 4 | 187 | 0.237 | 3.3 | 58 |
| ALTW-26-008 | 28.5 | 31.5 | 3 | 85 | 0.034 | 0.25 | 47 |
Antimony Enrichment Identified at Alturas West
Initial assay results have identified multiple zones of elevated antimony, with the strongest result returned from hole ALTW-26-006 (Please see Figure 2).
Hole ALTW-26-006 intersected 5.50 metres averaging 777 ppm Sb from 44.00 to 49.50 metres downhole, including a 0.83-metre sample grading 4,860 ppm Sb from 46.05 to 46.88 metres.
Additional antimony enrichment was encountered in hole ALTW-26-007, which returned 9.00 metres averaging 131 ppm Sb from 112.00 to 121.00 metres, including 5.00 metres averaging 208 ppm Sb from 113.00 to 118.00 metres.
The identification of antimony enrichment in multiple drill holes provides additional geochemical information to support ongoing evaluation of the Project. Further geological interpretation will be required to establish the controls, distribution, and continuity of the mineralization.
Figure 1: Plan View of Alturas West 2026 Drill Program
Figure 2: Alturas West Long Section - Looking North, showing Sb (ppm) results as of this news release
Figure 3: Alturas West Long Section - Looking North, showing Au (g/t) results as of this news release
Figure 4: Alturas West Long Section - Looking North, showing Cu (ppm) results as of this news release
Gold, Silver, and Base-Metal Associations
Hole ALTW-26-007 returned a multi-element interval averaging 131 ppm Sb and 0.165 g/t Au over 9.00 metres from 112.00 to 121.00 metres downhole (Please see Figure 3).
Within this interval, a 4.00-metre section from 116.00 to 120.00 metres averaged 0.237 g/t Au, 187 ppm Sb and 3.30 g/t Ag.
The broader 9.00-metre interval also averaged 107 ppm Pb, 128 ppm Zn, and 362 ppm arsenic (As). A one-metre sample from 117.00 to 118.00 metres returned 437 ppm Sb, 0.269 g/t Au, 8.6 g/t Ag, 881 ppm Pb, and 629 ppm Zn.
The combination of elevated antimony, gold, silver, lead, zinc, and arsenic within portions of ALTW-26-007 represents a compelling geochemical association. These results will be evaluated alongside geological observations to better understand the relationship between antimony enrichment and associated metals.
Copper Enrichment in ALTW-26-001
In addition to antimony and gold enrichment, hole ALTW-26-001 returned a separate interval of elevated copper concentrations (Please see Figure 4).
The hole intersected 11.30 metres averaging 708 ppm Cu from 94.00 to 105.30 metres downhole, including 3.80 metres averaging 1,048 ppm Cu from 101.50 to 105.30 metres.
This interval is characterized by relatively low antimony and arsenic concentrations compared with the stronger antimony-enriched intervals identified elsewhere in the initial results.
The copper enrichment provides an additional geochemical observation that will be considered during the ongoing geological interpretation of the Project.
Additional Geochemical Observations
Intervals of elevated antimony were returned from ALTW-26-002, -003, -004 and -008, with composite grades ranging from approximately 73 to 85 ppm Sb over downhole lengths of 3.00 to 7.90 metres. Hole ALTW-26-001 also returned 4.50 metres averaging 133 ppm Sb from 9.00 to 13.50 metres downhole.
Antimony enrichment across these holes provides additional information regarding the distribution of antimony within the drilled area. The Company will evaluate these results in conjunction with geological observations and other exploration datasets to better understand the geochemical characteristics of the Project.
Ongoing Exploration and Interpretation
Combined with the high-grade antimony showings at surface, the Company will evaluate assay results in conjunction with geological observations and other available exploration datasets to better understand the distribution, geological controls and potential relationships between the different styles of geochemical enrichment.
Analytical results from drill holes ALTW-26-009 through ALTW-26-011 are pending.
Sample Preparation and Analysis
Drill core samples from the Project were submitted to AGAT Laboratories for sample preparation and geochemical analysis. Samples were dried, crushed to 75% passing 2 mm, and split to obtain a 250 g subsample (AGAT method 200-075). The subsample was subsequently pulverized to 85% passing 75 microns (AGAT method 200-087).
Gold (Au) was analyzed by 50 g fire assay with an atomic absorption spectroscopy (AAS) finish (AGAT method 202-551). Multi-element analysis, including antimony (Sb), silver (Ag), copper (Cu), lead (Pb), and zinc (Zn), was conducted using four-acid digestion followed by inductively coupled plasma optical emission spectroscopy (ICP-OES; AGAT method 201-070).
Quality Assurance and Quality Control (QA/QC)
The Company implemented a quality assurance and quality control (QA/QC) program that included the insertion of certified reference materials (CDN-CM-54), blank samples (CDN-BL-10T), and field duplicates into the drill core sample stream. One standard, one blank, and one field duplicate were inserted for every fifty (50) drill core samples, representing a total of three QA/QC samples per fifty (50) samples.
QA/QC results were reviewed upon importation into MX Deposit geological database software. No major analytical issues were flagged during the initial database import and review of the assay results.
Community Engagement
Maxus recognizes that meaningful engagement with First Nations and local communities is an important component of responsible mineral exploration. The Company remains committed to maintaining transparent communication, minimizing environmental disturbance, and building respectful long-term relationships as exploration activities progress.
Qualified Person Statement
The scientific and technical information contained in this news release has been reviewed and approved by Morgan Verge, P.Geo., VP Exploration of the Company and a “qualified person” as defined in NI 43-101 – Standards of Disclosure for Mineral Projects. Ms. Verge has reviewed the drill hole geological information, analytical results, and associated QA/QC data presented in this release.
Management further cautions that historical results, discoveries and published resource estimates on adjacent or nearby mineral properties, whether in stated current resource estimates or historical resource estimates, are not necessarily indicative of the results that may be achieved on the Project.
About Maxus Mining Inc.
Maxus Mining Inc. (CSE: MAXM | OTCQB: MXMGF | FRA: R7V) is a mineral exploration company focused on locating, acquiring, and, if warranted, advancing economic mineral properties in premier jurisdictions. The Company is actively progressing its diversified portfolio totaling approximately 16,490 hectares of prospective terrain across British Columbia, Canada.
The Portfolio includes 9,492 hectares across three antimony projects, anchored by the Flagship Alturas Antimony Project, where a recent discovery returned high-grade naturally occurring antimony up to 69.98% Sb. The Hurley Antimony Project, located adjacent to Endurance Gold Corp.’s Reliance Gold Project, where 2024 drilling reported 19.2% Sb and 2.16 g/t Au over 0.5 m, and the Quarry Antimony Project, which hosts historical polymetallic samples grading 0.89 g/t Au, 3.8% Cu, 0.34% Zn, 42.5% Pb, 0.65 g/t Ag, and 20% Sb.
Maxus’ portfolio further includes the 3,875-hectare Lotto Tungsten Project, where a selected 1980 grab sample from a scheelite-bearing quartz vein assayed 10.97% WO₃, and the 3,123-hectare Penny Copper Project, which has over 100 years of recorded exploration. Recent work programs at Penny included rock sampling and geological mapping, with 2017 sampling returning copper values of 1046 ppm Cu (TK17-149c), 1808 ppm Cu (TK17-28), and 2388 ppm Cu (TK17-12). The Project is strategically located near the historic Sullivan Mine at Kimberley, British Columbia, an area that continues to attract significant exploration activity.
Maxus Mining is committed to advancing its British Columbia projects through targeted exploration programs designed to unlock value across multiple critical mineral systems.
References
On Behalf of the Board of Directors
Ranbir KalanDirector+1 (778) 374-9699info@maxusmining.com
Disclaimer for Forward-Looking Information
Photos accompanying this announcement are available at: https://www.globenewswire.com/NewsRoom/AttachmentNg/8eabf689-d078-48b1-a8f2-bc79e8cc67cd https://www.globenewswire.com/NewsRoom/AttachmentNg/f33f8d70-e4da-4ff7-923b-b301c4957d82 https://www.globenewswire.com/NewsRoom/AttachmentNg/a6d160de-ae6a-4941-88ec-911c185df285 https://www.globenewswire.com/NewsRoom/AttachmentNg/b51f2eba-5797-4002-9d19-399329d65160
NEWS RELEASE TRANSMITTED BY Globe Newswire




