Osisko Intersects 314 Metres Averaging 0.44% Cu at Gaspé

Highlights

• 314.0 metres averaging 0.44% Cu (infill) in DDH 30-1272; includes 9.0 metres averaging 3.23% Cu and 16.7 g/t Ag
• 240.5 metres averaging 0.44% Cu (infill) in DDH 30-1270
• 552.5 metres averaging 0.30% Cu (infill) in DDH 30-1269
• 142.6 metres averaging 0.34% Cu (infill) in DDH 30-1274
• 121.5 metres averaging 0.42% Cu (out-of-pit expansion) in DDH 30-1260
• 87.5 metres averaging 0.48% Cu (out-of-pit expansion) in DDH 30-1268; includes 10.7 metres averaging 1.98% Cu and 9.0 g/t Ag
• 85.5 metres averaging 0.42% Cu (out-of-pit expansion) in DDH 30-1265

Table 1: Infill and Expansion Drilling Results

* See explanatory notes below on copper equivalent values and Quality Assurance/Quality Controls. ** Infill refers to intercepts within the current MRE model; Expansion 1 refers to in-pit intercepts outside of the current MRE model; Expansion 2 refers to out-of-pit intercepts outside of the current MRE model. “Both” indicates drill holes that have contiguous shallower infill as well as deeper in-pit expansion intercepts.

Additional comments

Drill holes 30-1260 and 30-1268 are located on the north flank of Needle Mountain near its peak, with 30-1260 being the most southerly hole drilled to date on Needle Mountain. Hole 30-1260 was a vertical hole that intersected 121.5 metres averaging 0.42% Cu and 2.39 g/t Ag at the level of the B and C Zone skarns, including the intervening porcellanites. Drill hole 30-1268 is a westerly inclined hole that intersected 87.5 metres averaging 0.48% Cu and 2.71 g/t Ag, also at the level of the B and C Zone skarns. Both holes indicate that the mineralized system at Needle Mountain remains open to the south.

Drill hole 30-1266 is a westerly inclined hole located along the northeast margin of the Needle Mountain pit. It intersected two short intervals of mineralization, including 33.0 metres averaging 0.41% Cu and 2.63 g/t Ag.

Drill hole 30-1265 is a vertical hole located just south of the southern limit of the 2026 MRE model. It intersected four intervals of mineralization, 12.4 to 85.5 metres long, averaging 0.27 to 0.83% Cu and 2.43 to 7.30 g/t Ag, the last interval representing a significant out-of-pit expansion.

Drill holes 30-1262, 30-1270 and 30-1272 are all infill holes located near the southern margin of the 2026 MRE model. Hole 30-1262 is westerly inclined that expanded the mineralized envelope to the west, while 30-1270 and 30-1272 drilled through pillars of both the B Zone and C Zone underground workings, returning continuous well-mineralized intervals of 240.5 and 314.0 metres, respectively, averaging 0.44% Cu.

Drill holes 30-1261, 30-1263, 30-1264, 30-1267, 30-1269, 30-1271 and 30-1274 are all vertical to near-vertical infill holes located on the south flank of Copper Mountain. All returned multiple mineralized intervals that graded in a range of 0.12% to 0.40% Cu, all within values anticipated from the 2026 MRE model.

Mineralization at Gaspé Copper is of porphyry copper/skarn type and occurs as disseminations and stockworks of chalcopyrite with pyrite or pyrrhotite and minor bornite and molybdenite. One prograde and at least five retrograde vein/stockwork mineralizing events have been recognized at Copper Mountain, which overprint earlier, stratiform, carbonate replacement skarn and porcellanite-hosted mineralization throughout the Gaspé Copper system. Porcellanite is a historical mining term used to describe bleached, pale green to white potassic-altered hornfels. Subvertical stockwork mineralization dominates at Copper Mountain whereas prograde bedding-parallel mineralization, which is mostly stratigraphically controlled, dominates in the area of lower Copper Mountain, Needle Mountain, Needle East, and Copper Brook. High molybdenum grades (up to 0.5% Mo) were locally obtained in both the C Zone and E Zone skarns away from Copper Mountain.

The 2022 to 2024 Osisko Metals drill programs were focused on defining open-pit resources within the Copper Mountain stockwork mineralization (see May 6, 2024 MRE press release ). Extending the resource model south of Copper Mountain into the poorly-drilled prograde skarn/porcellanite portion of the system subsequently led to a significantly increased resource, mostly in the Inferred category (see November 14, 2024 MRE press release ), and additional drilling in 2025 led to an additional significant increase in resources, mostly in the Measured and Indicated categories (see April 14, 2026 MRE press release ).

The current drill program is designed to convert the bulk of the remaining 2026 MRE Inferred resources to Measured and Indicated categories, as well as test the expansion of the overall resource laterally to the west, and to the south/southwest towards Needle East and Needle Mountain respectively.

Table 2: Drill hole locations

Explanatory note regarding copper-equivalent grades

Copper Equivalent (CuEq) grades are presented for illustrative purposes only to express the combined value of copper, molybdenum, and silver as a single copper grade. CuEq grades are calculated using long-term metal prices of US$4.50/lb copper, US$20.00/lb molybdenum, and US$45.00/oz silver, and incorporate assumptions for metallurgical recoveries, payable metal factors, smelting and refining charges, transportation costs, and royalties. Hence the CuEq calculation is essentially based on net smelter return (NSR) values. NSR for each metal is estimated by applying metallurgical recoveries, payable factors, metal prices, and applicable smelting, refining, transportation, and penalty charges to the in-situ metal grades. CuEq grades are derived using a linear regression relationship established between copper grade and copper NSR, and then calculated by substituting total NSR (Cu + Mo + Ag) for copper NSR in the regression equation. The simplified formula is expressed as CuEq (%) = Cu (%) + 3.40327 × Mo (%) + 0.00008 × Ag (g/t).

Qualified Person

The scientific and technical content of this news release has been reviewed and approved by Mr. Bernard-Olivier Martel, P. Geo. (OGQ 492), an independent “qualified person” as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).

Quality Assurance / Quality Control

Mineralized intervals reported herein are calculated using an average 0.12% CuEq lower cut-off over contiguous 20-metre intersections (shorter intervals as the case may be at the upper and lower limits of reported intervals). Intervals of 10 metres or less are generally not reported unless considered material. True widths are estimated at 80 – 90 % of the reported core length intervals.

Osisko Metals adheres to a strict QA/QC program for core handling, sampling, sample transportation and analyses, including insertion of blanks and standards in the sample stream. Drill core is drilled in HQ or NQ diameter and securely transported to its core processing facility on site, where it is logged, cut and sampled. Samples selected for assay are sealed and shipped to ALS Canada Ltd.’s preparation facility in Sudbury. Sample preparation details (code PREP-31DH) are available on the ALS Canada website. Pulps are analyzed at the ALS Canada Ltd. facility in North Vancouver, BC. All samples are analyzed by four acid digestion followed by both ICP-AES and ICP-MS for Cu, Mo and Ag.

About Osisko Metals

Osisko Metals Incorporated is a Canadian exploration and development company creating value in the critical metals sector, with a focus on copper and zinc. The Company acquired a 100% interest in the past-producing Gaspé Copper mine from Glencore Canada Corporation in July 2023. The Gaspé Copper mine site is located near Murdochville in Québec's Gaspé Peninsula. The Company is currently focused on resource expansion of the Gaspé Copper deposits, with current pit-constrained Measured and Indicated Mineral Resources of 1.83 Bt averaging 0.32% CuEq and Inferred Mineral Resources of 239 Mt averaging 0.46% CuEq (in compliance with NI 43-101). For more information, see Osisko Metals' April 14, 2026 news release entitled "Osisko Metals Announces Significant Increase in Mineral Resource at Gaspé Copper". Gaspé Copper hosts the largest undeveloped copper resource in eastern North America, strategically located near existing infrastructure in the mining-friendly province of Québec.

In addition to the Gaspé Copper project, the Company is working with Appian Capital Advisory LLP through the Pine Point Mining Limited joint venture to advance one of Canada ' s largest past-producing zinc mining camps, the Pine Point project, located in the Northwest Territories. The current mineral resource estimate for the Pine Point project consists of Indicated Mineral Resources of 49.5 Mt averaging 5.52% ZnEq and Inferred Mineral Resources of 8.3 Mt averaging 5.64% ZnEq (in compliance with NI 43-101). For more information, see Osisko Metals ' June 25, 2024 news release entitled "Osisko Metals releases Pine Point mineral resource estimate: 49.5 million tonnes of indicated resources at 5.52% ZnEq". The Pine Point project is located on the south shore of Great Slave Lake, NWT, close to infrastructure, with paved road access, an electrical substation and 100 kilometres of viable haul roads.

For further information on this news release, visit www.osiskometals.com or contact:

Don Njegovan, PresidentEmail: info@osiskometals.comPhone: (416) 500-4129

Cautionary Statement on Forward-Looking Information

This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as "expects", or "does not expect", "is expected", "interpreted", “management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "potential", "feasibility", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains forward-looking information pertaining to, among other things: the tax treatment of the FT Units; the timing of incurring the Qualifying Expenditures and the renunciation of the Qualifying Expenditures; the ability to advance Gaspé Copper to a construction decision (if at all); the ability to increase the Company's trading liquidity and enhance its capital markets presence; the potential re-rating of the Company; the ability for the Company to unlock the full potential of its assets and achieve success; the ability for the Company to create value for its shareholders; the advancement of the Pine Point project; the anticipated resource expansion of the Gaspé Copper system and Gaspé Copper hosting the largest undeveloped copper resource in eastern North America.

Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management, in light of management's experience and perception of trends, current conditions and expected developments, as well as other factors that management believes to be relevant and reasonable in the circumstances, including, without limitation, assumptions about: the ability of exploration results, including drilling, to accurately predict mineralization; errors in geological modelling; insufficient data; equity and debt capital markets; future spot prices of copper and zinc; the timing and results of exploration and drilling programs; the accuracy of mineral resource estimates; production costs; political and regulatory stability; the receipt of governmental and third party approvals; licenses and permits being received on favourable terms; sustained labour stability; stability in financial and capital markets; availability of mining equipment and positive relations with local communities and groups. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information are set out in the Company's public disclosure record on SEDAR+ (www.sedarplus.ca) under Osisko Metals' issuer profile. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward- looking information, whether as a result of new information, future events or otherwise, other than as required by law.

Photos accompanying this announcement are available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/03f3393f-1256-4ca8-a3c7-bd04946a7590

https://www.globenewswire.com/NewsRoom/AttachmentNg/c98645b3-59cf-4277-bbb4-dcd20f35faf4

NEWS RELEASE TRANSMITTED BY Globe Newswire